www.calgraphics.com.au
www.fleetgraphics.com.au
 
   
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

page top

 


Product Construction

  1. PVC, cadmium free laminate film with an elongation of >100%
  2. Film and adhesive thickness of 215 micron - may vary slightly across the range
  3. Permanent acrylic adhesive with Comply™ Performance
  4. PE coated with Kraft paper liner

Abrasion Resistance

Test: Di-Noc™ applied to aluminium plate and exposed to 7000 cycles using a Taber Abrader CS-17 with 1 KG load weight.
Test Result: No pattern change.

Heat Resistance

Test: Di-Noc™ applied to an aluminium plate and aged for 28 days at 65°C.
Test Result: Minimal change to adhesion and film appearance.

Stain Resistance

Test: Di-Noc™ applied to an aluminium panel and placed in direct contact with the substances listed below.
Test Result: No effect.
Substances: Milk, Coffee, Coca™Cola, Wine, Lemon Juice, Tea, Vinegar, Soybean oil, Salt water (1%), Ammonium water, Soap water (1%) Synthetic detergent, Hydrochloric acid (10%) Sodium hydroxide (10%)

Chemical Resistance

Test: Di-Noc™ applied to an aluminium panel, conditioned for 72 hours and then immersed in the chemical agents listed below, and placed in direct contact with the substances listed below.
Test Result: No effect.
Substances: Heptane – 5 hours, Ethyl alcohol – 5 hours, Water – 7 days, Salt Spray (5%, 43°C) – 7 days

Flammability

Di-Noc™ products comply with AS/NZS 3837:1998 Class 2

More information is available from us or by contacting 3M directly.

Primer

Generally there is no need to use primer for standard applications. In case the surface energy of the substrate is low or if the application is on critical surfaces with sharp curves either a solvent or water based primer may be necessary. High surface energy substrates such as metal don’t require priming. Priming is required at any overlap and end / edge of the film, i.e. underneath the butt join. Calgraphics will assess your individual circumstances and advise on the correct surface preparation.

 

Home    About    3M Di-Noc    Tech. Info    Patterns    FAQ    Terms    Privacy    Contact Us