Cleaning and Maintenance

Use a soft cloth with mild detergent and water. In case of heavy dirt accumulation use detergent and hot water (70°C – 80°C).

Printing to Di-Noc™?

Di-Noc™ can be either screen or digitally printed to however the results will vary depending upon the colour and texture of the Di-Noc™ design and colour. Therefore it is necessary to trial first.

Cutting

Di-Noc™ can be cut in the same way as normal vinyls.

Can Di-Noc™ be applied over Di-Noc™?

Different Di-Noc™ Architectural Finishes have different degrees of surface energy and therefore it is recommended to use a primer. The same applies if you have a reason to patch an area previously applied with Di-Noc™.

Is the entire range available?

3M stock a range of 25 common and popular Di-Noc™ Architectural Finishes in Australia. The remainder of the range is available from Japan; however additional delivery time and costs may apply.

Do I need any special application tools?

We strongly suggest the use of 3M accredited applicators to apply the film in order for the final product to look great and to be fully covered by product warranties. Further, a suitable primer is often used to ensure Di-Noc™ is fixed correctly to hard edges and joins.

Where can I find Product and Instruction bulletins?

Product and Instruction bulletins are available by making a selection below.

• Product Bulletin _^(110KB)
• Instruction Bulletin ^_(167KB)

Where can I find Material Data Safety Sheets?

Material Data Safety Sheets are available by making a selection below.

• Di-Noc™ Material ^_(24.5KB)
• Primer EC 1368NT* ^_(27.6KB)
• Primer WP 2000^{# _(31.5KB)}
• Primer DP 900N ^_(25.8KB)

^* EC 1368NT is a solvent based primer and more commonly used due to the wider range of applicable substrates.

^# WP 2000 is a water based primer.