|
Use a soft cloth with mild detergent and water. In case of heavy dirt accumulation use detergent and hot water (70°C – 80°C). Printing to Di-Noc™? Di-Noc™ can be either screen or digitally printed to however the results will vary depending upon the colour and texture of the Di-Noc™ film. Therefore it is necessary to trial it. Cutting Di-Noc™ film can be cut in the same way as normal vinyls. Can Di-Noc™ be applied over Di-Noc™? Different Di-Noc™ films have different degrees of surface energy and therefore it is recommended to use a primer. The same applies if you have a reason to patch an area previously applied with Di-Noc™. Is the entire range available? 3M stock a range of 25 common and popular Di-Noc™ films in Australia. The remainder of the range is available from Japan; however additional delivery time and costs may apply. Do I need any special application tools? We suggest you use 3M qualified applicators to apply the film in order to be fully covered by product warranties. Should you choose to apply Di-Noc™ yourself the same basic tools are used (as per regular vinyl products), however the squeegee is stiffer and a primer might need to be used. Where can I find Product and Instruction bulletins? Product and Instruction bulletins can be located here
Home About 3M Di-Noc Tech. Info Patterns FAQ Terms Privacy Contact Us |
 |